Gecko [ discoverychristianschool.com ]

Name	Size	Permission
.placeholder	0 B	-rw-r--r--
add-shell	1.03 KB	-rwxr-xr-x
addgroup	58.03 KB	-rwxr-xr-x
adduser	58.03 KB	-rwxr-xr-x
agetty	107.57 KB	-rwxr-xr-x
arp	66.13 KB	-rwxr-xr-x
arpd	110.55 KB	-rwxr-xr-x
blkdiscard	34.38 KB	-rwxr-xr-x
blkid	138.41 KB	-rwxr-xr-x
blkzone	90.38 KB	-rwxr-xr-x
blockdev	94.38 KB	-rwxr-xr-x
bridge	170.62 KB	-rwxr-xr-x
capsh	53.32 KB	-rwxr-xr-x
chcpu	46.38 KB	-rwxr-xr-x
chgpasswd	66.42 KB	-rwxr-xr-x
chmem	70.38 KB	-rwxr-xr-x
chpasswd	95.09 KB	-rwxr-xr-x
chroot	50.41 KB	-rwxr-xr-x
dcb	170.67 KB	-rwxr-xr-x
delgroup	20.71 KB	-rwxr-xr-x
deluser	20.71 KB	-rwxr-xr-x
devlink	239.05 KB	-rwxr-xr-x
dpkg-preconfigure	4.46 KB	-rwxr-xr-x
dpkg-reconfigure	4.43 KB	-rwxr-xr-x
faillock	22.24 KB	-rwxr-xr-x
findfs	14.38 KB	-rwxr-xr-x
fsck	58.38 KB	-rwxr-xr-x
fsfreeze	14.38 KB	-rwxr-xr-x
fstab-decode	14.23 KB	-rwxr-xr-x
fstrim	86.38 KB	-rwxr-xr-x
genl	126.59 KB	-rwxr-xr-x
getcap	14.23 KB	-rwxr-xr-x
getpcaps	14.23 KB	-rwxr-xr-x
getty	107.57 KB	-rwxr-xr-x
groupadd	103.16 KB	-rwxr-xr-x
groupdel	90.99 KB	-rwxr-xr-x
groupmod	103.15 KB	-rwxr-xr-x
grpck	62.43 KB	-rwxr-xr-x
grpconv	58.27 KB	-rwxr-xr-x
grpunconv	58.27 KB	-rwxr-xr-x
iconvconfig	30.4 KB	-rwxr-xr-x
ifconfig	82.01 KB	-rwxr-xr-x
installkernel	2.65 KB	-rwxr-xr-x
invoke-rc.d	16.13 KB	-rwxr-xr-x
ip	704.99 KB	-rwxr-xr-x
ipmaddr	18.56 KB	-rwxr-xr-x
iptunnel	26.55 KB	-rwxr-xr-x
isosize	34.38 KB	-rwxr-xr-x
killall5	26.31 KB	-rwxr-xr-x
ldattach	34.38 KB	-rwxr-xr-x
ldconfig	965.01 KB	-rwxr-xr-x
losetup	130.53 KB	-rwxr-xr-x
mii-tool	27.08 KB	-rwxr-xr-x
mkfs	14.38 KB	-rwxr-xr-x
mkhomedir_helper	14.26 KB	-rwxr-xr-x
mkswap	134.39 KB	-rwxr-xr-x
nameif	14.65 KB	-rwxr-xr-x
newusers	106.97 KB	-rwxr-xr-x
nologin	22.38 KB	-rwxr-xr-x
pam-auth-update	20.94 KB	-rwxr-xr-x
pam_getenv	2.82 KB	-rwxr-xr-x
pam_namespace_helper	467 B	-rwxr-xr-x
pam_timestamp_check	14.24 KB	-rwxr-xr-x
pivot_root	14.38 KB	-rwxr-xr-x
plipconfig	14.48 KB	-rwxr-xr-x
policy-rc.d	255 B	-rwxr-xr-x
pwck	58.38 KB	-rwxr-xr-x
pwconv	54.26 KB	-rwxr-xr-x
pwhistory_helper	22.24 KB	-rwxr-xr-x
pwunconv	54.27 KB	-rwxr-xr-x
rarp	37.13 KB	-rwxr-xr-x
readprofile	34.42 KB	-rwxr-xr-x
reload-application.sh	514 B	-rw-r--r--
remove-shell	1.08 KB	-rwxr-xr-x
rmt	63.19 KB	-rwxr-xr-x
rmt-tar	63.19 KB	-rwxr-xr-x
route	69.17 KB	-rwxr-xr-x
rtacct	114.53 KB	-rwxr-xr-x
rtcwake	54.38 KB	-rwxr-xr-x
rtmon	118.52 KB	-rwxr-xr-x
runuser	82.38 KB	-rwxr-xr-x
sendmail	10.44 MB	-rwxr-xr-x
service	9 KB	-rwxr-xr-x
setcap	14.23 KB	-rwxr-xr-x
shadowconfig	1.94 KB	-rwxr-xr-x
slattach	45.2 KB	-rwxr-xr-x
start-stop-daemon	43.42 KB	-rwxr-xr-x
sudo_logsrvd	313.16 KB	-rwxr-xr-x
sudo_sendlog	191.76 KB	-rwxr-xr-x
sulogin	58.39 KB	-rwxr-xr-x
swaplabel	18.38 KB	-rwxr-xr-x
swapoff	50.38 KB	-rwxr-xr-x
swapon	58.38 KB	-rwxr-xr-x
switch_root	18.38 KB	-rwxr-xr-x
sysctl	30.31 KB	-rwxr-xr-x
tarcat	936 B	-rwxr-xr-x
tc	579.7 KB	-rwxr-xr-x
tipc	170.67 KB	-rwxr-xr-x
unix_chkpwd	42.24 KB	-rwxr-sr-x
unix_update	42.24 KB	-rwxr-xr-x
update-ca-certificates	5.54 KB	-rwxr-xr-x
update-fonts-alias	5.71 KB	-rwxr-xr-x
update-fonts-dir	3.98 KB	-rwxr-xr-x
update-fonts-scale	6.1 KB	-rwxr-xr-x
update-gsfontmap	390 B	-rwxr-xr-x
update-passwd	38.49 KB	-rwxr-xr-x
update-rc.d	17.72 KB	-rwxr-xr-x
update-shells	3.97 KB	-rwxr-xr-x
useradd	155.9 KB	-rwxr-xr-x
userdel	111.06 KB	-rwxr-xr-x
usermod	143.74 KB	-rwxr-xr-x
vdpa	122.73 KB	-rwxr-xr-x
vigr	72.77 KB	-rwxr-xr-x
vipw	72.77 KB	-rwxr-xr-x
visudo	284.8 KB	-rwxr-xr-x
wipefs	50.38 KB	-rwxr-xr-x
zic	62.32 KB	-rwxr-xr-x
zramctl	134.51 KB	-rwxr-xr-x

Code Editor : service

#!/bin/sh

###########################################################################
# /usr/bin/service
#
# A convenient wrapper for the /etc/init.d init scripts.
#
# This script is a modified version of the /sbin/service utility found on
# Red Hat/Fedora systems (licensed GPLv2+).
#
# Copyright (C) 2006 Red Hat, Inc. All rights reserved.
# Copyright (C) 2008 Canonical Ltd.
#   * August 2008 - Dustin Kirkland <kirkland@canonical.com>
# Copyright (C) 2013 Michael Stapelberg <stapelberg@debian.org>
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
#
# On Debian GNU/Linux systems, the complete text of the GNU General
# Public License can be found in `/usr/share/common-licenses/GPL-2'.
###########################################################################

is_ignored_file() {
	case "$1" in
		skeleton | README | *.dpkg-dist | *.dpkg-old | rc | rcS | single | reboot | bootclean.sh)
			return 0
		;;
	esac
	return 1
}

VERSION="`basename $0` ver. 1.69~deb13u1"
USAGE="Usage: `basename $0` < option > | --status-all | \
[ service_name [ command | --full-restart ] ]"
SERVICE=
ACTION=
SERVICEDIR="/etc/init.d"
OPTIONS=
is_systemd=

if [ $# -eq 0 ]; then
   echo "${USAGE}" >&2
   exit 1
fi

if [ -d /run/systemd/system ]; then
   is_systemd=1
fi

cd /
while [ $# -gt 0 ]; do
  case "${1}" in
    --help | -h | --h* )
       echo "${USAGE}" >&2
       exit 0
       ;;
    --version | -V )
       echo "${VERSION}" >&2
       exit 0
       ;;
    *)
       if [ -z "${SERVICE}" -a $# -eq 1 -a "${1}" = "--status-all" ]; then
          cd ${SERVICEDIR}
          for SERVICE in * ; do
            case "${SERVICE}" in
              functions | halt | killall | single| linuxconf| kudzu)
                  ;;
              *)
                if ! is_ignored_file "${SERVICE}" \
		    && [ -x "${SERVICEDIR}/${SERVICE}" ]; then
                        out=$(env -i LANG="$LANG" LANGUAGE="$LANGUAGE" LC_CTYPE="$LC_CTYPE" LC_NUMERIC="$LC_NUMERIC" LC_TIME="$LC_TIME" LC_COLLATE="$LC_COLLATE" LC_MONETARY="$LC_MONETARY" LC_MESSAGES="$LC_MESSAGES" LC_PAPER="$LC_PAPER" LC_NAME="$LC_NAME" LC_ADDRESS="$LC_ADDRESS" LC_TELEPHONE="$LC_TELEPHONE" LC_MEASUREMENT="$LC_MEASUREMENT" LC_IDENTIFICATION="$LC_IDENTIFICATION" LC_ALL="$LC_ALL" PATH="$PATH" TERM="$TERM" "$SERVICEDIR/$SERVICE" status 2>&1)
                        retval=$?
                        if echo "$out" | grep -Fiq "usage:"; then
                          #printf " %s %-60s %s\n" "[?]" "$SERVICE:" "unknown" 1>&2
                          echo " [ ? ]  $SERVICE" 1>&2
                          continue
                        else
                          if [ "$retval" = "0" -a -n "$out" ]; then
                            #printf " %s %-60s %s\n" "[+]" "$SERVICE:" "running"
                            echo " [ + ]  $SERVICE"
                            continue
                          else
                            #printf " %s %-60s %s\n" "[-]" "$SERVICE:" "NOT running"
                            echo " [ - ]  $SERVICE"
                            continue
                          fi
                        fi
                  #env -i LANG="$LANG" LANGUAGE="$LANGUAGE" LC_CTYPE="$LC_CTYPE" LC_NUMERIC="$LC_NUMERIC" LC_TIME="$LC_TIME" LC_COLLATE="$LC_COLLATE" LC_MONETARY="$LC_MONETARY" LC_MESSAGES="$LC_MESSAGES" LC_PAPER="$LC_PAPER" LC_NAME="$LC_NAME" LC_ADDRESS="$LC_ADDRESS" LC_TELEPHONE="$LC_TELEPHONE" LC_MEASUREMENT="$LC_MEASUREMENT" LC_IDENTIFICATION="$LC_IDENTIFICATION" LC_ALL="$LC_ALL" PATH="$PATH" TERM="$TERM" "$SERVICEDIR/$SERVICE" status
                fi
                ;;
            esac
          done
          exit 0
       elif [ $# -eq 2 -a "${2}" = "--full-restart" ]; then
          SERVICE="${1}"
          # On systems using systemd, we just perform a normal restart:
          # A restart with systemd is already a full restart.
          if [ -n "$is_systemd" ]; then
             ACTION="restart"
          else
             if [ -x "${SERVICEDIR}/${SERVICE}" ]; then
               env -i LANG="$LANG" LANGUAGE="$LANGUAGE" LC_CTYPE="$LC_CTYPE" LC_NUMERIC="$LC_NUMERIC" LC_TIME="$LC_TIME" LC_COLLATE="$LC_COLLATE" LC_MONETARY="$LC_MONETARY" LC_MESSAGES="$LC_MESSAGES" LC_PAPER="$LC_PAPER" LC_NAME="$LC_NAME" LC_ADDRESS="$LC_ADDRESS" LC_TELEPHONE="$LC_TELEPHONE" LC_MEASUREMENT="$LC_MEASUREMENT" LC_IDENTIFICATION="$LC_IDENTIFICATION" LC_ALL="$LC_ALL" PATH="$PATH" TERM="$TERM" "$SERVICEDIR/$SERVICE" stop
               env -i LANG="$LANG" LANGUAGE="$LANGUAGE" LC_CTYPE="$LC_CTYPE" LC_NUMERIC="$LC_NUMERIC" LC_TIME="$LC_TIME" LC_COLLATE="$LC_COLLATE" LC_MONETARY="$LC_MONETARY" LC_MESSAGES="$LC_MESSAGES" LC_PAPER="$LC_PAPER" LC_NAME="$LC_NAME" LC_ADDRESS="$LC_ADDRESS" LC_TELEPHONE="$LC_TELEPHONE" LC_MEASUREMENT="$LC_MEASUREMENT" LC_IDENTIFICATION="$LC_IDENTIFICATION" LC_ALL="$LC_ALL" PATH="$PATH" TERM="$TERM" "$SERVICEDIR/$SERVICE" start
               exit $?
             fi
          fi
       elif [ -z "${SERVICE}" ]; then
         SERVICE="${1}"
       elif [ -z "${ACTION}" ]; then
         ACTION="${1}"
       else
         OPTIONS="${OPTIONS} ${1}"
       fi
       shift
       ;;
   esac
done

run_via_sysvinit() {
   # Otherwise, use the traditional sysvinit
   if [ -x "${SERVICEDIR}/${SERVICE}" ]; then
      exec env -i LANG="$LANG" LANGUAGE="$LANGUAGE" LC_CTYPE="$LC_CTYPE" LC_NUMERIC="$LC_NUMERIC" LC_TIME="$LC_TIME" LC_COLLATE="$LC_COLLATE" LC_MONETARY="$LC_MONETARY" LC_MESSAGES="$LC_MESSAGES" LC_PAPER="$LC_PAPER" LC_NAME="$LC_NAME" LC_ADDRESS="$LC_ADDRESS" LC_TELEPHONE="$LC_TELEPHONE" LC_MEASUREMENT="$LC_MEASUREMENT" LC_IDENTIFICATION="$LC_IDENTIFICATION" LC_ALL="$LC_ALL" PATH="$PATH" TERM="$TERM" "$SERVICEDIR/$SERVICE" ${ACTION} ${OPTIONS}
   else
      echo "${SERVICE}: unrecognized service" >&2
      exit 1
   fi
}

update_openrc_started_symlinks() {
   # Skip native openrc-run files
   grep -q '^#! */$usr/$\?sbin/openrc-run' $SERVICEDIR/$SERVICE && return
   # maintain the symlinks of /run/openrc/started so that
   # rc-status works with the service command as well
   if [ -d /run/openrc/started ] ; then
      case "${ACTION}" in
      start)
         if [ ! -h /run/openrc/started/$SERVICE ] ; then
            ln -s $SERVICEDIR/$SERVICE /run/openrc/started/$SERVICE || true
         fi
      ;;
      stop)
         rm /run/openrc/started/$SERVICE || true
      ;;
      esac
   fi
}

# When this machine is running systemd, standard service calls are turned into
# systemctl calls.
if [ -n "$is_systemd" ]
then
   UNIT="${SERVICE%.sh}.service"

case "${ACTION}" in
      restart|status|try-restart)
         exec systemctl $sctl_args ${ACTION} ${UNIT}
      ;;
      start|stop)
         # Follow the principle of least surprise for SysV people:
         # When running "service foo stop" and foo happens to be a service that
         # has one or more .socket files, we also stop the .socket units.
         # Users who need more control will use systemctl directly.
         for unit in $(systemctl list-unit-files --full --type=socket 2>/dev/null | sed -ne 's/\.socket\s*[a-z]*\s*$/.socket/p'); do
             if [ "$(systemctl -p Triggers show $unit)" = "Triggers=${UNIT}" ]; then
                systemctl $sctl_args ${ACTION} $unit
             fi
         done
         exec systemctl $sctl_args ${ACTION} ${UNIT}
      ;;
      reload)
         _canreload="$(systemctl -p CanReload show ${UNIT} 2>/dev/null)"
         # Don't block on reload requests during bootup and shutdown
         # from units/hooks and simply schedule the task.
         if ! systemctl --quiet is-system-running; then
              sctl_args="--no-block"
         fi
         if [ "$_canreload" = "CanReload=no" ]; then
            # The reload action falls back to the sysv init script just in case
            # the systemd service file does not (yet) support reload for a
            # specific service.
            run_via_sysvinit
         else
            exec systemctl $sctl_args reload "${UNIT}"
         fi
         ;;
      force-stop)
         exec systemctl --signal=KILL kill "${UNIT}"
         ;;
      force-reload)
         _canreload="$(systemctl -p CanReload show ${UNIT} 2>/dev/null)"
         if [ "$_canreload" = "CanReload=no" ]; then
            exec systemctl $sctl_args restart "${UNIT}"
         else
            exec systemctl $sctl_args reload "${UNIT}"
         fi
         ;;
      *)
         # We try to run non-standard actions by running
         # the init script directly.
         run_via_sysvinit
         ;;
   esac
fi

update_openrc_started_symlinks
run_via_sysvinit

Discovery Christian School

${this.title}

Code Editor : service

Home

Serving homeschool families by offering support, connection and encouragement as a cover school.